HYUNDAI, HIT-18S, LATHE, 2-AXIS CNC, UNIVERSAL
Stock Number: 5160
Hyundai HiT-18S
Age: 1994
Condition: Good
Click to view larger photo
Request A Quote On This Item
| Specification | Description |
|---|
| Swing | 17.32 " |
| Max Mach. Diameter | 11.0" |
| Max Mach Length | 20" |
| X-Cross | 7.09" |
| Z-Long. | 20.08" |
| Rapids | 1181 IPM |
| No. of Turrets | 1 |
| Positions | 8 |
| Bar Capacity | 1.97 |
| Speed Min RPM | 36 RPM |
| Max RPM | 3,600 RPM |
| HP (30 Minutes) | 17.5 HP / 20 HP Motor |
| Spindle Bore | 3.1" |
| Bar Capacity | 2.5" |
| Approx Dims | 101 x 64 x 72 |
| Weigth | 10,000 Lbs |
Equipped With:
Siemens 840
automatic tool probing/setting,
Siemens controller, hydraulic Tailstock/programmable quill,
Kitagawa B-210 10" powerchuck
4 Tool Blocks / boring holder
3 Square Tool Clamps , one is missing
8 Station Turret
Complete set of manuals
Turbo Chip Conveyors and flood coolant system
Spindle Orientation 360.00 degree all increments (easy to set) possible, just put code in program in 100ths of a degree incrememnts " (as stated by owner)
Color Monitor, graphis, lots of memory, RS232 and networking capability
Currently hooked up to 208v 2 phase, can be used on 220v or 440v 3 phase also if needed
2nd owner purchased machine in Setpt of '06,
As stated by owner, RUNS NICE, FAST and ACCURATE
Shop will load at no charge..
Manta Machinery & Equipment
352-596-1007
352-596-7003
sales@mantamachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
