Bullard 46" DynaTape, Vertical Boring Mill, CNC
Stock Number: 5230
Bullard 46" Dynatape
Age: 1988
Condition: Very Good
Request A Quote On This Item
| Specification | Description |
|---|
| Table Diameter | 46" |
| Max Swing | 58" |
| Height Under Rail | 40" |
| Motor | 50 HP |
| CNC Control | Allen Bradley 8200 CNC |
| Side Head | NO |
| Turret Head | YES 5 Position Turret Head |
| Min Max RPM | |
| Chuck | 46" 3 Jaw Combination Chuck |
Equipped With:
Allen Bradley 8200 CNC Control
Full Guarding with Lexan Transparent Door / Window
Chip Conveyor
New Pain
**Machine came out of Pratt & Whitney Research Center (not used in production!!!)**
Currently IN PLANT UNDER POWER IN USA
46" 3 Jaw Combination Chuck
5 Position Power indexing Turret (CNC Controlled)
Allen Bradley 8200 CNC Control
Coolant Pan and Guarding
*****50Hz Motors***** (OPTION, See below)
Notes:
The 60Hz motors WILL RUN on 50Hz power. The motors will run slightly faster and slightly warmer. No Change is required. There are three options which are listed below:
**OPTION 1: Run machine as is
**OPTION 2: Run machine with Optional 50Hz Motors
**OPTION 3: Run machine with 60Hz Motors and purchase an INVERTER to swtich Hz from 60Hz to 50Hz
Option 1 would require no additional funds, Option 2 is rather expensive, and Option 3 is fairly inexpensive as the only thing needed would be an INVERTER would need to be purchased (you can buy these at any electrical supply company all over the world)
Full Guarding with Lexan Transparent Door / Window................. 9,000 USD
Chip Conveyor (with Paint) ......................................................... 8,200 USD
New Paint on Machine ................................................................ 3,000 USD
50 Hz Motor Change for Israel Power Requirement ................... 15,000 USD **** (Option to Change Motors)
**** Notes:
This is an option to change motors from 60Hz to 50Hz
Main Motor Must be changed out to 50Hz
Rail Life Motor Must be Change out to 50Hz
Pump Motor must be Changed out to 50Hz
Hydraulic Motor must be changed out to 50Hz
Transformer must be purhased to reduced voltage from 440v to 380v
any and all transformer taps must be changed out to accomodate 380 voltage.
Manta Machinery & Equipment
352-596-1007
352-596-7003
sales@mantamachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
